Electric Wallcovering Steamer for easy removal of wall coverings
Wallcovering Perforator tool designed by wallpaper professionals to make projucts fo smoother & faster. Helps save time and minimize problems
Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter
The Porta Nailer Pro (410) manual flooring nailer will blind nail 5/8” and 3/4” Domestic Hardwood Flooring. The 410 can be used for 9/16” and 33/32” Domestic Flooring and Bamboo but will require optional shoe pads or shoe assembly’s sold separately. The 410 features a ratcheting ram allowing for single or multi-hit functionality guaranteeing are properly set in the tongue of the flooring. Multi-hit functionality minimizes installer fatigue and insures greater impact and floor tightness. The410 Nailer can use T or L style 16 gauge barbed flooring cleat nails in lengths of (T Nails: 2”, 1-1/2” and 1-3/16”) (L-Nails: 2”, 1-3/4” and 1-1/2”). The Porta Nailer Pro uses an integrated bypass pusher system and delivers extra protection to Pre Finished Floors with a Shoe Base System that position in front and on top of the flooring for perfect tool balance and protection of the top flooring edge. This made in the USA tool is
The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with
Tilt-Lok 7-1/4" Circular Saw with Case
JET 30" Black Head Center-Cut Bolt Cutter is specially designed to produce superior cutting force. The high-carbon alloy tool steel jaws are ideally suited to cutting rebar, medium tensile and soft bolts, rods, rivets, bars and chains with a maximum hardness of HRC-40. Designed with safety in mind, these bolt cutters exceed Federal Specifications and are sure to give you the quality and performance you've come to expect from JET
JET 12-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. See True Value # 724615
JET 3-Ton SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards
JET 10-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional
The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!
The 3ft cable on this toilet auger is constructed of the highest quality wire for maximum flexibility, works in all type of toilets
The Hand drain cleaner is a simple, manual powered unit for sinks, showers,etc. The 1/4" cable is extra flexible for the even smallest inside drain line
The Model K is an economical and lightweight alternative for cleaning 1 1/4" to 3" lines up to 50ft. Works well on downspouts
This hand held drill powered drain cleaner includes a variable speed commercial grade drill to clean sinks, showers and tubs
The Model R Drain Cleaner is professionally engineered to clean 3"-6" drain lines for distances up to 75ft. The unit features a heavy duty 1/3HP motor, extra large steel tubing frame, and snap-lock tool connectors which eliminates screws rusting or losing a tool in the line. The Model R also features the industries toughest 5/8"x75" Tr--Max cable with added flexibility and reduced kinking. A typical application of the Model R is a mainline running from the house to the street
